Military

Boeing Ordered to Repair or Replace 787 Engines

Thinkstock

The Federal Aviation Administration (FAA) on Friday adopted a new airworthiness directive for 787-8 and 787-9 Dreamliners, ordering Boeing Co. (NYSE: BA) to revise the planes’ flight manual and, more importantly, rework or replace at least one engine on aircraft equipped with General Electric Co. (NYSE: GE) GEnx-1B engines. The directive becomes effective May 9.

The engine replacement order follows an incident in March when a 787 experienced a non-startable power loss in a newer version of the GE engine caused by ice shedding from the engine’s fan. The ice shedding caused a fan imbalance that then caused “substantial damage to the engine and an in-flight non-restartable power loss.”

There are two versions of the GEnx-1B engine currently in use on the 787: the performance improvement program 1 (PIP1) and the performance improvement program 2 (PIP2). The problem has only occurred on the PIP2 version.

According to the FAA, this directive affects 176 airplanes operated by 29 airlines worldwide, including an estimated 23 aircraft registered in the United States. The cost to U.S. operators to revise a manual is estimated at $85, or a total of $3,655. The engine rework is estimated at $3,400 per engine, or a total of $146,200 for U.S. operators.


The agency also noted that due to the compressed repair schedule, some aircraft could be grounded.

The FAA has shortened its usual procedures and compressed the repair schedule for making these changes, declaring the engine issue to be “urgent”:

The urgency of this issue stems from the safety concern over continued safe flight and landing for airplanes that are powered by two GEnx-1B PIP2 engines operating in a similar environment to the event airplane. In this case both GEnx-1B PIP2 engines may be similarly damaged and unable to be restarted in flight. The potential for common cause failure of both engines in flight is an urgent safety issue.

The directive also requires Boeing and GE to revise the flight manuals and give the crews a new fan ice removal procedure that reduces the likelihood of engine damage due to ice shedding. For some planes the engine’s fan stator module assembly must be reworked.

The flight manual must be revised in seven days and the rework or replacement of the engines must be completed within 150 days. The FAA said that Boeing and GE have developed a maintenance plan to support this work.

The FAA also stated that this is an interim solution and addresses only reworking a single engine on any aircraft equipped with two GEnx-1B PIP2 engines with certain model and part numbers. The agency said it may consider requiring rework on all similar engines.

Sponsored: Attention Savvy Investors: Speak to 3 Financial Experts – FREE

Ever wanted an extra set of eyes on an investment you’re considering? Now you can speak with up to 3 financial experts in your area for FREE. By simply clicking here you can begin to match with financial professionals who can help guide you through the financial decisions you’re making. And the best part? The first conversation with them is free.Click here to match with up to 3 financial pros who would be excited to help you make financial decisions.

Thank you for reading! Have some feedback for us?
Contact the 24/7 Wall St. editorial team.